MORPHOLOGICAL FEATURES OF HIGH-ENTROPY VACUUM COATINGS

Authors

  • Y. V. Auchynnikau Гродненский государственный университет им. Янки Купалы
  • N. M. Chekan Физико-технический институт НАН Беларуси
  • I. P. Akula Физико-технический институт НАН Беларуси
  • T. I. Pinchuk Институт порошковой металлургии НАН Беларуси

Keywords:

ion-plasma deposition, coating, surface energy, morphology, properties

Abstract

The article deals with issues related to the study of the morphology of high-entropy coatings by optical and
atomic force microscopy. These thin-layer protective layers were formed on a metal substrate using the ionplasma sputtering technology. It has been established that as a result of the application of this technique for the
deposition of coatings of complex chemical composition, nanophases are formed in the structure. Depending on
the technological regimes for the formation of coatings, as well as on the chemical composition of the protective
layers, the concentration of nanostructures will change significantly. The studies conducted to determine the
values of the specific surface energy formed by high-entropy coatings by the ion-plasma sputtering method also
show the relationship between the technology of coating formation and this parameter. Thus, the relationship
between the concentration of nanostructures in a highly hard coating of a complex chemical composition and the
values of the specific surface energy of these protective layers has been shown.

Author Biographies

Y. V. Auchynnikau, Гродненский государственный университет им. Янки Купалы

д-р техн. наук, проф.

N. M. Chekan, Физико-технический институт НАН Беларуси

канд. физ.-мат. наук

I. P. Akula, Физико-технический институт НАН Беларуси

канд. техн. наук

T. I. Pinchuk, Институт порошковой металлургии НАН Беларуси

инженер

References

Полевой С. Н., Упрочнение машиностроительных материалов / С. Н. Полевой, В. Д. Евдокимов. – М.: Машиностроение, 1994. – 496 c.

Чеботаровский, В. В. Технология лакокрасочных покрытий в машиностроении / В. В. Чеботаровский, Э. К. Кондратов. – М.: Машиностроение, 1978. – 295 с.

Ткачук, Б. В. Получение тонких полимерных покрытий из газовой фазы / Б. В. Ткачук, В. М. Колотыркин. – М.: Химия, 1977. – 216 с.

Белый, В. А. Полимерные покрытия / В. А. Белый, В. Д. Довгяло, О. Р. Юркевич. – Мн.: Наука и техника, 1976. – 416 с.

Корякина, М. И. Технология полимерных покрытий / М. И. Корякина, В. Е. Попцов – М.: Химия, 1983. – 336 с.

Яковлев, Д. Д. Химия и технология лакокрасочных покрытий / Д. Д. Яковлев – Л.: Химия, 1981. – 352 с.

Ясуда, Х. Полимеризация в плазме / Х. Ясуда – М.: Мир, 1988. – 376 с.

Овчинников, Е. В. Формирования тонкопленочных покрытий при воздействии технологических факторов / Е. В. Овчинников // Прогрессивные технологии и системы машиностроения: Международный сборник научных трудов – Вып. 1, 2 (45). – Донецк: ДонНТУ, 2013. – С. 197-205.

Дерягин, Б. В. Теория устойчивости коллоидов и тонких пленок. / Б. В. Дерягин – М.: Наука, 1986. – 206 с.

Lofaj, F. [et al.] Nanoindentation, AFM and tribological properties of thin ncWC/a-C coatings / J. Eur. Ceram. Soc. – 2012. – Vol. 32. – P. 2043–2051.

Elia G. [et al.] Ethanol effect on gold nanoparticle aggregation state and its implication in the interaction mechanism with DNA / J. Colloid Interface Sci. – 2018. – Vol. 529. – P. 65–76.

Овчинников, Е. В. Высокотемпературные многослойные покрытия на основе многокомпонентных соединений / Е. В. Овчинников [и др.] // Веснік Гродзенскага дзяржаўнага ўніверсітэта імя Янкі Купалы. – Сер. 6. Тэхніка. – 2017. – Т. 7. – № 2. – С. 6-17.

Shi X.N. [et al.] Atomic force microscopy-Scanning electrochemical microscopy (AFM-SECM) for nanoscale topographical and electrochemical characterization: principles, applications and perspectives // Electrochim. Acta. – 2020. – Vol. 332. – P. 135472.

Овчинников, Е. В. Особенности наноструктурированных покрытий при воздействии энергетических факторов / Е. В. Овчинников // Веснік ГрДУ, сер. 6. – 2011. – № 1 (116). – С. 5-13.

Published

2025-11-26

How to Cite

Auchynnikau Е. В., Chekan Н. М. ., Akula И. П. ., & Pinchuk Т. И. . (2025). MORPHOLOGICAL FEATURES OF HIGH-ENTROPY VACUUM COATINGS. Progressive Technologies and Systems of Mechanical Engineering, (2 (81), 35–44. Retrieved from https://ojs.donntu.ru/ptsm/article/view/654

Issue

Section

Статьи